P5 Powerstations
CTC Division Home Products Support Distributors Division Contact

P5 PowerStation

This section includes specific information about the P5 PowerStation including information about the available disk sets, running capabilities, and additional information.


Disk Sets for the P5 PowerStation

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.
Model Number *Rev# Operating System **Disks
P5X-XXX-XX-XXX 208 - 212

DOS without Interact

PowerStation Utilities Disk (KA-72463-201) - Utils.zip

P5X-XXX-XX-XXX 208 - 212

DOS with Interact and PowerStation Shell

  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
P5X-XXX-XX-XXX 208 - 212 DOS with Interact and MachineShop Shell
  • MSDOS 6.22 Install Disk Recovery Media-for Backup or Archival purposes only with PowerStations (KA-72953-100) - MSDOS622.zip
  • PowerStation Start Install Disk (must install this before installing the MachineShop Shell below) (KA-83109-106) KA-83109-106.zip
  • MachineShop Shell Install Disk (KA-83073-107) KA-83073-107.zip
  • Flashback Utility (installs all of the above disks using a compact flash reader to compact flash units only) FlashUtil.zip
  • MachineShop Shell Getting Started Guide
P5X-XXX-XX-XXX 208 - 212 Windows 95
  • PowerStation Utilities Disk (KA-72463-202) - Utils95.zip
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P5X-XXX-XX-XXX 208 - 212

Windows 95 with Interact and PowerStation Shell

  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Dynapro SC3 Touchscreen Driver 2.2.3 for Windows 95 (KA-72816-101) - SC3_95.zip
P5X-XXX-XX-XXX 208 - 212

Windows 95 with Interact and MachineShop Shell

P5X-XXX-XX-XXX 208 - 212

Windows NT

  • PowerStation Utilities Disk (KA-72463-202) - UtilsNT.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
P5X-XXX-XX-XXX 208 - 212 Windows NT with Interact and the PowerStation Shell
  • PowerStation Shell Install Disk (KA-72451-212) - Shell.zip
  • Windows NT 4.0 Emergency Repair Disk for P4/P5/P7 (KA-72668-100) - NTemgcy.zip
  • Dynapro SC3 Touchscreen Driver 2.2.2 for Windows NT (KA-72817-101) - SC3_NT
  • Windows 95/ NT 4.0 VGA Drivers (KA-72670-101) - WinVGA.zip
  • Interact Project Manager IPM (KA-82228-202) - IPM.zip
  • IPM User Guide (04222-107) - 04222107.PDF
P5X-XXX-XX-XXX 208 - 212 Windows NT with Interact and the MachineShop Shell

Back to the top


P5 PowerStation Running Capabilities

The Revision Number is the last three numbers of the serial number found on the side of your unit.
Example: XX-XXXXX-100.

Revision
Number

P3 Power Station Shell

MachineShop Shell

Floppy

HD Capable

Ethernet Port

Note

100, 100c, 101, 102, 103

Yes

No

No

No

No

Keyboard

200, 201, 202, 203, 204, 205, 206, 207

Yes Yes Yes Yes NE2000 N/A
208, 209, 210, 211, 212 Yes Yes Yes Yes NE2000

CPF-Ready

213

Yes

Yes

Yes

Yes

182557

New Pentium Only

Back to the top

Still have questions? E-mail us at: emn_support_ctc@parker.com

Back to the Hardware Menu

Back to the Support Site Map


Parker Automation
Special Interest
Distributor
Corner
PSP
Login
CTC
News

[ Home | Products | Support | Buying | About Us | Contact |
| Free Evaluation Software ]

50 West TechneCenter Drive
Milford, OH 45150
Phone 513-831-2340

© Copyright 1998-2008
Parker Hannifin Corp.
All rights reserved.