CTC PowerStations Big on Ethernet . . . Small on HMI System Overhead.

Now your machine can take full advantage of Ethernet communications to factory devices and systems without the added cost and support requirements of SCADA software. Not only do all CTC PowerStations come with a standard Ethernet port, but also include INTERACT HMI software with Ethernet drivers for common PLCs, Compumotor 6K motion controllers and more. With CTC, you get the connectivity you want for your machine without the complexity and cost you don't want. And you get a factory-proven, PC-based platform that is easy to support in the field with solid-state Compact FLASH storage media.

Additional References MachineShop Brochure (PDF)

PowerStations Include Standard Ethernet Connectivity 10/100 Base-T Ethernet Port* Ethernet Drivers for Common Factory Devices... A-B ControlLogix PLC A-B PLC-5, SLC 505 Compumotor 6K Motion Controller Modbus TCP/IP (Modicon Quantum and Momentum) TI505 Ethernet family of PLCs More to come...

*P1 units include a 10 Base-T Ethernet port.

MotionPanel HMI for Parker Compumotor 6K Motion Controllers Plug and Play Setup Automatically detects up to 8 axes of 6K motion Ethernet Advantages Compact FLASH Downloads PC-based hardware/software with an upgrade path to advanced HMI functionality Click here for more information about MotionPanel.

MotionPanel HMI for 6K Controllers

Learn more about big HMI performance from CTC...

	Special Interest Distributor Corner PSP Login CTC News [ Home | Products | Support | Buying | About Us | Contact | | Free Evaluation Software ] 50 West TechneCenter Drive Milford, OH 45150 Phone 513-831-2340	© Copyright 1998-2008 Parker Hannifin Corp. All rights reserved.